XC Open source finite element analysis program
RigidDiaphragm.h
1 //----------------------------------------------------------------------------
2 // XC program; finite element analysis code
3 // for structural analysis and design.
4 //
5 // Copyright (C) Luis Claudio Pérez Tato
6 //
7 // This program derives from OpenSees <http://opensees.berkeley.edu>
8 // developed by the «Pacific earthquake engineering research center».
9 //
10 // Except for the restrictions that may arise from the copyright
11 // of the original program (see copyright_opensees.txt)
12 // XC is free software: you can redistribute it and/or modify
13 // it under the terms of the GNU General Public License as published by
14 // the Free Software Foundation, either version 3 of the License, or
15 // (at your option) any later version.
16 //
17 // This software is distributed in the hope that it will be useful, but
18 // WITHOUT ANY WARRANTY; without even the implied warranty of
19 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 // GNU General Public License for more details.
21 //
22 //
23 // You should have received a copy of the GNU General Public License
24 // along with this program.
25 // If not, see <http://www.gnu.org/licenses/>.
26 //----------------------------------------------------------------------------
27 /* ****************************************************************** **
28 ** OpenSees - Open System for Earthquake Engineering Simulation **
29 ** Pacific Earthquake Engineering Research Center **
30 ** **
31 ** **
32 ** (C) Copyright 1999, The Regents of the University of California **
33 ** All Rights Reserved. **
34 ** **
35 ** Commercial use of this program without express permission of the **
36 ** University of California, Berkeley, is strictly prohibited. See **
37 ** file 'COPYRIGHT' in main directory for information on usage and **
38 ** redistribution, and for a DISCLAIMER OF ALL WARRANTIES. **
39 ** **
40 ** Developed by: **
41 ** Frank McKenna (fmckenna@ce.berkeley.edu) **
42 ** Gregory L. Fenves (fenves@ce.berkeley.edu) **
43 ** Filip C. Filippou (filippou@ce.berkeley.edu) **
44 ** **
45 ** ****************************************************************** */
46 
47 // $Revision: 1.2 $
48 // $Date: 2003/02/14 23:00:55 $
49 // $Source: /usr/local/cvs/OpenSees/SRC/domain/constraints/RigidDiaphragm.h,v $
50 
51 
52 // File: ~/model/constraints/RigidDiaphragm.h
53 //
54 // Written: fmk 1/99
55 // Revised:
56 //
57 // Purpose: This file contains the class definition for RigidDiaphragm.
58 // RigidDiaphragm is a class which constructs MFreedom_Constraint objects
59 // for a 3d Frame with a rigid diaphragm .. suitable for small
60 // displacement problems only.
61 
62 #ifndef RigidDiaphragm_h
63 #define RigidDiaphragm_h
64 
65 #include "MFreedom_Constraint.h"
66 
67 namespace XC {
68 class Domain;
69 class ID;
70 
72 //
76  {
77  //XXX Put NodePtrsWithIDS to make easier to deal with la disconnection.
78  public:
79  RigidDiaphragm(Domain &theDomain, int nodeR, ID &nodeC, int perpDirnToPlaneConstrained, int startMPtag);
80  virtual ~RigidDiaphragm();
81  };
82 } // end of XC namespace
83 
84 #endif
Domain (mesh and boundary conditions) of the finite element model.
Definition: Domain.h:98
Definition: ID.h:77
RigidDiaphragm(Domain &theDomain, int nodeR, ID &nodeC, int perpDirnToPlaneConstrained, int startMPtag)
Constructor.
Definition: RigidDiaphragm.cpp:75
Imposes a rigid body motion to the nodes on included in the diaphragm .
Definition: RigidDiaphragm.h:75
virtual ~RigidDiaphragm()
Destructor.
Definition: RigidDiaphragm.cpp:243
Multi-freedom constraint. Objectt of this class store the information for a multifreedom constraint...
Definition: MFreedom_Constraint.h:84
================================================================================
Definition: ContinuaReprComponent.h:34